Answer :
The range of values for L0 in a four-bar mechanism depends on the type of mechanism. For a crank rocker, L0 should be less than or equal to the shortest link. For a drag link, L0 should be greater than or equal to the longest link. For a double rocker, L0 should be equal to the link connected to the ground.
The range of values for L0 in a four-bar mechanism depends on the type of mechanism. Let's analyze each option:
a. Crank Rocker: In a crank rocker mechanism, L0 is the shortest link. So, for L0 to be the shortest link, it should be less than or equal to both L1 and L2. Thus, the range for L0 is L0 ≤ min(L1, L2).
b. Drag Link: In a drag link mechanism, L0 is the longest link. So, for L0 to be the longest link, it should be greater than or equal to both L1 and L2. Thus, the range for L0 is L0 ≥ max(L1, L2).
c. Double Rocker: In a double rocker mechanism, L0 is the link connected to the ground. So, for L0 to be the ground link, it should be equal to L3. Thus, the range for L0 is L0 = L3.
d. Change Point: In a change point mechanism, L0 is the link connected to both the input and output links. So, for L0 to be the input and output link, it should be equal to both L1 and L2. Thus, the range for L0 is L0 = L1 = L2.
e. Triple Rocker: In a triple rocker mechanism, L0 is the intermediate link. The range for L0 depends on the relationship between L0, L1, and L2. There is no specific range for L0 in this case.
The range of values for L0 in a four-bar mechanism varies depending on the type of mechanism. In a crank rocker mechanism, L0 should be less than or equal to the shortest link (L1 or L2). In a drag link mechanism, L0 should be greater than or equal to the longest link (L1 or L2).
In a double rocker mechanism, L0 should be equal to the link connected to the ground (L3). In a change point mechanism, L0 should be equal to both input and output links (L1 and L2). In a triple rocker mechanism, there is no specific range for L0.
Hence, the range of values for L0 in a four-bar mechanism depends on the type of mechanism. For a crank rocker, L0 should be less than or equal to the shortest link. For a drag link, L0 should be greater than or equal to the longest link. For a double rocker, L0 should be equal to the link connected to the ground. For a change point, L0 should be equal to both input and output links. And for a triple rocker, there is no specific range for L0.
To know more about range, visit :
brainly.com/question/31957868
#SPJ11